Accuracy and Mechanical Properties of Open-Cell Microstructures Fabricated by Selective Laser Sintering

This paper investigates the applicability of selective laser sintering (SLS) for the manufacture of scaffold geometries for bone tissue engineering applications. Porous scaffold geometries with open-cell structure and relative density of 10-60 v% were computationally designed and fabricated by selective laser sintering using polyamide powder. Strut and pore sizes ranging from 0.4 - 1 mm and 1.2 -2 mm are explored. The effect of process parameters on compressive properties and accuracy of scaffolds was examined and outline laser power and scan spacing were identified as significant factors. In general, the designed scaffold geometry was not accurately fabricated on the micron-scale. The smallest successfully fabricated strut and pore size was 0.4 mm and 1.2 mm, respectively. It was found that selective laser sintering has the potential to fabricate hard tissue engineering scaffolds. However the technology is not able to replicate exact geometries on the micron-scale but by accounting for errors resulting from the diameter of the laser and from the manufacturing induced geometrical deformations in different building directions, the exact dimensions of the manufactured scaffolds can be predicted and controlled indirectly, which corresponds favorably with its application in computer aided tissue engineering.