The development of a computer program for thermal comfort analysis

Simple item page
dc.contributor.advisorArumi, Francisco Noeen
dc.creatorPraditsmanont, Apichaten
dc.date.accessioned2011-03-31T17:11:26Zen
dc.date.available2011-03-31T17:11:26Zen
dc.date.issued2001-12en
dc.descriptiontexten
dc.description.abstractCreating thermal comfort for building occupants is considered one of the primary goals of architectural design. It is the ultimate objective of this study to develop a useful computer program that is capable of analyzing thermal comfort in a passive environment. In order to assess thermal comfort using the Fanger thermal comfort prediction model (1970), the developed computer program must simulate not only indoor air temperature and mean radiant temperature, but also indoor air movement and humidity level. Based on the theoretical framework of a ventilation network model (Arumí-Noé, 1986), a ventilation module is developed and integrated into the DEROB thermal simulation program. The simulated results from the integrated program are compared with selected empirical data, and its thermal comfort prediction capability is tested. The ventilation module consists of two main components, the branch solution and the circuit loop solution. These solutions require the construction of the ventilation network and the circuit loops that are determined by the architectural geometry. The branch solution calculates air velocities, pressure drops, and resistances to air flow along branches in the ventilation network. The circuit loop solution uses the branches' pressure drops and resistances to calculate air mass flow rates in all circuit loops. The ventilation module is integrated into the DEROB thermal simulation program through the heat balance solution for space nodes. Consequently, the integrated thermal simulation program is able to predict all physical factors influencing thermal comfort, especially indoor air velocity and humidity level. Empirical data from Dascalaki's four experiments are selected for comparisons with simulated results. The configuration of Dascalaki's test room is digitized, and the simulation is set up and run based on the condition specified in each experiment. The simulated results are compared to Dascalaki's experimental results. A moderate agreement between these results is found. The integrated thermal simulation program tends to be more sensitive to the outdoor wind velocity than Dascalaki's experiments. The proposed computer program is also tested for its prediction of thermal comfort. The program successfully predicts thermal comfort in architectural spaces, and thus provides an alternative method for thermal comfort analysis. Further research to refine the program is suggested.
dc.description.departmentArchitectureen
dc.format.mediumelectronicen
dc.identifier.urihttp://hdl.handle.net/2152/10787en
dc.rightsCopyright is held by the author. Presentation of this material on the Libraries' web site by University Libraries, The University of Texas at Austin was made possible under a limited license grant from the author who has retained all copyrights in the works.en
dc.rights.restrictionRestricteden
dc.subjectBuildings--Engery conservation--Computer programsen
dc.subjectBuildings--Environmental engineering--Data processingen
dc.titleThe development of a computer program for thermal comfort analysisen
thesis.degree.departmentArchitecture, School ofen
thesis.degree.disciplineArchitectureen
thesis.degree.grantorThe University of Texas at Austinen
thesis.degree.levelDoctoralen
thesis.degree.nameDoctor of Philosophyen

Access full-text files

Original bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
praditsmanonta019.pdf
Size:
1017.14 KB
Format:
Adobe Portable Document Format
Description:
Restricted to EID users
Download

License bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.66 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

UT Electronic Theses and Dissertations