A CFD-informed model for subchannel resolution crud prediction
| dc.contributor.advisor | Haas, Derek Anderson, 1981- | |
| dc.contributor.committeeMember | Slattery, Stuart | |
| dc.contributor.committeeMember | Clarno, Kevin | |
| dc.contributor.committeeMember | Leibowicz, Benjamin | |
| dc.contributor.committeeMember | Landsberger, Sheldon | |
| dc.creator | Gurecky, William Ladd | |
| dc.date.accessioned | 2019-04-11T14:15:34Z | |
| dc.date.available | 2019-04-11T14:15:34Z | |
| dc.date.created | 2018-12 | |
| dc.date.issued | 2019-02-14 | |
| dc.date.submitted | December 2018 | |
| dc.date.updated | 2019-04-11T14:15:34Z | |
| dc.description.abstract | A physics-directed, statistically based, surrogate model of the small scale flow fea- tures that impact Chalk River unidentified deposit (crud) growth is presented in this work. The objective of the surrogate is to provide additional details of the rod surface temperature, heat flux, and near-wall turbulent kinetic energy fields which cannot be explicitly captured by a subchannel code. Operating as a mapping from the high fidelity computational fluid dynamics (CFD) data to the low fidelity subchannel grid (hi2lo), the model provides CFD-informed bound- ary conditions to the crud model executed on the subchannel pin surface mesh. The surface temperature, heat flux, and turbulent kinetic energy, henceforth referred to as the fields of interest (FOI), govern the growth rate of crud on the surface of the rod and the precipitation of boron in the porous crud layer. Therefore the model predicts the behavior of the FOIs as a function of position in the core and local thermal-hydraulic (TH) conditions. The subchannel code produces an estimate for all crud-relevant TH quantities at a coarse spatial resolution everywhere in the core and executes substantially faster than CFD. In the hi2lo approach, the solution provided by the subchannel code is augmented by a predicted stochastic component of the FOI informed by CFD results to provide a more detailed description of the target FOIs than subchannel can provide alone. To this end, a novel method based on the marriage of copula and gradient boosting techniques is proposed. This methodology forgoes a spatial interpolation procedure for a statistically driven approach, which predicts the fractional area of a rod’s surface in excess of some critical temperature but not precisely where such maxima occur on the rod surface. The resultant model retains the ability to account for the presence of hot and cold spots on the rod surface induced by turbulent flow downstream of spacer grids when producing crud estimates. Sklar’s theorem is leveraged to decompose multivariate probability densities of the FOI into independent copula and marginal models. The free parameters within the copula model are predicted using a combination of supervised regression and classification machine learning techniques with training data sets supplied by a suite of precomputed CFD results spanning a typical pressurized water reactor TH envelope. Results show that compared to the subchannel standalone case, the hi2lo method more accurately preserves the influence of spacer grids on the crud growth rate. Or more precisely, the hi2lo method recovers key statistical properties of the FOI which impact crud growth. Compared to gold standard high fidelity CFD/crud coupled results in a single assembly test case, the hi2lo model produced a relative total crud mass difference of -8.9% compared to the standalone subchannel relative crud mass difference of 192.1%. | |
| dc.description.department | Mechanical Engineering | |
| dc.format.mimetype | application/pdf | |
| dc.identifier.uri | https://hdl.handle.net/2152/74242 | |
| dc.identifier.uri | http://dx.doi.org/10.26153/tsw/1372 | |
| dc.language.iso | en | |
| dc.subject | Subchannel | |
| dc.subject | CRUD | |
| dc.subject | Machine learning | |
| dc.subject | Copula | |
| dc.subject | Gradient boosting | |
| dc.subject | Monte Carlo | |
| dc.title | A CFD-informed model for subchannel resolution crud prediction | |
| dc.type | Thesis | |
| dc.type.material | text | |
| thesis.degree.department | Mechanical Engineering | |
| thesis.degree.discipline | Mechanical Engineering | |
| thesis.degree.grantor | The University of Texas at Austin | |
| thesis.degree.level | Doctoral | |
| thesis.degree.name | Doctor of Philosophy |
Access full-text files
Original bundle
1 - 1 of 1
Loading...
- Name:
- GURECKY-DISSERTATION-2018.pdf
- Size:
- 25.8 MB
- Format:
- Adobe Portable Document Format