Solid Freeform Fabrication of Ceramic Parts from Filler Loaded Preceramic Polymers
dc.creator | Sindelar, R. | |
dc.creator | Buhler, P. | |
dc.creator | Niebling, F. | |
dc.creator | Otto, A. | |
dc.creator | Greil, P. | |
dc.date.accessioned | 2019-10-22T18:22:19Z | |
dc.date.available | 2019-10-22T18:22:19Z | |
dc.date.issued | 2002 | |
dc.description.abstract | Manufacturing of ceramic parts was achieved by selective laser treatment of a preceramic polymer (polysiloxane) loaded with ceramic filler powder (alumina). Thin layers of polymer/filler powder mixture were sequentially cured with a CO2-laser (λ=10.6 µm) thereby generating the geometrical shape of the part. Subsequently, the cured thermoset part was annealed in nitrogen atmosphere at 600 to 1000 °C to convert the compact into a Si-OC/Al2O3 micro-composite material. Dimensional changes upon pyrolysis (∆l/l0 ≈ 3 %) can be controlled by adjusting the polymer-to-filler ratio and the heat treatment conditions. The new process is called Selective Laser Curing (SLC). | en_US |
dc.description.department | Mechanical Engineering | en_US |
dc.description.sponsorship | Financial support of Fonds der Chemischen Industrie and Deutsche Forschungsgemeinschaft is gratefully acknowledged. | en_US |
dc.identifier.uri | https://hdl.handle.net/2152/76335 | |
dc.identifier.uri | http://dx.doi.org/10.26153/tsw/3424 | |
dc.language.iso | eng | en_US |
dc.relation.ispartof | 2002 International Solid Freeform Fabrication Symposium | en_US |
dc.rights.restriction | Open | en_US |
dc.subject | Ceramic | en_US |
dc.title | Solid Freeform Fabrication of Ceramic Parts from Filler Loaded Preceramic Polymers | en_US |
dc.type | Conference paper | en_US |