A simple sub-1V voltage reference

A traditional bandgap reference voltage has a value approximately equal to 1.2V. This is an inconvenient value to obtain in short-channel CMOS circuits where the nominal power supply voltage is 1.2V or lower. Here, a simple circuit is presented to generate a reference voltage between 600mV and 800mV, based on the threshold voltage of a MOS device, which will be suitable for biasing transistors in strong inversion as well as for use in 6-bit data converters needed for high speed data communication systems. The circuit uses a novel, but simple, method for generating the temperature coefficients needed for generating a stable voltage reference across temperature. The core circuit produces a PTAT current that when passed through a diode-connected device, with a CTAT threshold voltage, will produce a voltage that is stable across temperature. The measured results demonstrate an average voltage variation of 4.62mV across five chips, each containing eight voltage reference circuits, and a minimum voltage variation of 1.1mV from 0°C to 80°C. A variation of the proposed circuit replaces the BJTs with MOSFETs to achieve smaller area, and simulation results indicate even less voltage variation across temperature.