Browsing by Subject "Standards"
Now showing 1 - 11 of 11
- Results Per Page
- Sort Options
Item Carta con resultados preliminares del muestreo suelos(2006) Martínez, Dr. Fernando Díaz-BarrigaItem The effects of mentoring standards as a policy instrument on the mentor-mentee relationship of beginning math and science teachers in high-poverty middle schools(2013-05) Dietz, Laurel Kathleen, 1963-; Vasquez Heilig, JulianInduction and mentoring programs are often portrayed as commonsense policy solutions to lower teacher attrition, build beginning teacher capability and ultimately, raise student achievement. Mentoring standards however, have rarely been examined to see how their interpretation and implementation influence the relationship of mentor-mentee pairs in local contexts under a state voluntary induction and mentoring program. In this multi-cased qualitative study, I interviewed nine mentor-mentee pairs and conducted separate mentor and mentee focus groups as well as observing the mentor and mentee interact during an observational cycle in seven high poverty middle schools under Texas' Beginning Teacher Induction and Mentoring (BTIM) program. I also performed a content analysis of mentor training and support materials. Using Cohen and Moffitt's policy implementation framework I found that due to the lack of specificity and formalness of mentoring standards in BTIM-specific and non-specific documents, and the spottiness of mentor initial training, most mentors and mentees needed to rely on their capabilities and dispositions to define their roles. Consequently, it seemed that in the eyes of the mentors and mentees their relationship was informal; this was reflected in the roles that they assumed. Based on the study results, I recommend that mentoring standards for the mentor and mentee be more specific and formally defined. Indeed, there appears to be a need to formally conceptualize mentoring from its policy aims to its policy instruments within mentoring policy.Item Ethics in structural design and mechanical design for live entertainment scenery(2014-05) Vieira, David Vincent; Dawson, Kathryn; Cloyes, Rusty; Dawson, Kathryn M.; Cloyes, RustyScenic construction requires a strong understanding of a range of principles related to construction including: materials strength properties, mechanical components, electrical motor systems, fluid power systems, and finishing techniques. A manager of scenic construction, or a Technical Director (TD), is required to take artistic designs and ideas and create magical elements on stage that are safe for performers, installers, operators, and audiences. In order to create these onstage spectacles, a great deal of planning, engineering, and careful fabrication must take place. There are several ways for a Technical Director to gain the knowledge required to effectively work at any level of entertainment production. This mixed-methods research study asks: what are the ethical standards that guide how a TD’s work is completed? The thesis begins with a review of the job of the Technical Director in Live Entertainment and data from a survey conducted of professionals in scenic technology. Results from the survey were analyzed to provide both quantitative data, in the form of statistics, and qualitative response data. Additional discussion addresses a sample of the resources for structural design support available currently to the field, as well as challenges that some professionals confront in their typical practice. The thesis concludes a review of literature around engineering ethics and liability in engineering practice and recommendations for the incorporation of new ethical standards in live entertainment scenic production.Item How technical standards are developed for global engineering and manufacturing organizations(2010-08) Bauer Bailey, Alyssa Kay; Seepersad, Carolyn; Ambler, TonyThis paper explores how corporations can choose technical standards used throughout its organization. A methodology for choosing the standard is introduced. It is based on the methods that professional standards organizations use to create new standards for industries. The steps to choose an external standard as well as create new internal standards are consensus, development, approvals, and maintenance. Questions about standards from Applied Materials are answered: what technical standard should be used for engineering drawings, should the company use metric units, what tolerance scheme should be used, and how are standards chosen when a merger or acquisition is performed? Applied Materials should use the ASME Y14.5M-1994 standard. The move to metric should be done if the customers request it. Simple parts and complex assemblies should not be toleranced the same way. When mergers and acquisitions are done, the consensus, development, approval, and maintenance method should be used to choose which standards should be used.Item Improved regulatory oversight using real-time data monitoring technologies in the wake of Macondo(2014-08) Carter, Kyle Michael; Van Oort, EricAs shown by the Macondo blowout, a deepwater well control event can result in loss of life, harm to the environment, and significant damage to company and industry reputation. Consistent adherence to safety regulations is a recurring issue in deepwater well construction. The two federal entities responsible for offshore U.S. safety regulation are the Department of the Interior’s Bureau of Safety and Environmental Enforcement (BSEE) and the U.S. Coast Guard (USCG), with regulatory authorities that span well planning, drilling, completions, emergency evacuation, environmental response, etc. With such a wide range of rules these agencies are responsible for, safety compliance cannot be comprehensively verified with the current infrequency of on-site inspections. Offshore regulation and operational safety could be greatly improved through continuous remote real-time data monitoring. Many government agencies have adopted monitoring regimes dependent on real-time data for improved oversight (e.g. NASA Mission Control, USGS Earthquake Early Warning System, USCG Vessel Traffic Services, etc.). Appropriately, real-time data monitoring was either re-developed or introduced in the wake of catastrophic events within those sectors (e.g. Challenger, tsunamis, Exxon Valdez, etc.). Over recent decades, oil and gas operators have developed Real-Time Operations Centers (RTOCs) for continuous, pro-active operations oversight and remote interaction with on-site personnel. Commonly seen as collaborative hubs, RTOCs provide a central conduit for shared knowledge, experience, and improved decision-making, thus optimizing performance, reducing operational risk, and improving safety. In particular, RTOCs have been useful in identifying and mitigating potential well construction incidents that could have resulted in significant non-productive time and trouble cost. In this thesis, a comprehensive set of recommendations is made to BSEE and USCG to expand and improve their regulatory oversight activities through remote real-time data monitoring and application of emerging real-time technologies that aid in data acquisition and performance optimization for improved safety. Data sets and tools necessary for regulators to effectively monitor and regulate deepwater operations (Gulf of Mexico, Arctic, etc.) on a continuous basis are identified. Data from actual GOM field cases are used to support the recommendations. In addition, the case is made for the regulator to build a collaborative foundation with deepwater operators, academia and other stakeholders, through the employment of state-of-the-art knowledge management tools and techniques. This will allow the regulator to do “more with less”, in order to address the fast pace of activity expansion and technology adoption in deepwater well construction, while maximizing corporate knowledge and retention. Knowledge management provides a connection that can foster a truly collaborative relationship between regulators, industry, and non-governmental organizations with a common goal of safety assurance and without confusing lines of authority or responsibility. This solves several key issues for regulators with respect to having access to experience and technical know-how, by leveraging industry experts who would not normally have been inaccessible. On implementation of the proposed real-time and knowledge management technologies and workflows, a phased approach is advocated to be carried out under the auspices of the Center for Offshore Safety (COS) and/or the Offshore Energy Safety Institute (OESI). Academia can play an important role, particularly in early phases of the program, as a neutral playing ground where tools, techniques and workflows can be tried and tested before wider adoption takes place.Item Knowledge and skills essential for secondary campus-based administrators to appropriately serve students with special needs(2014-08) Bineham, Susan Cadle; Pazey, Barbara Lynn, 1951-To explore the reported knowledge and skills held by secondary campus-based administrators pertaining to the instructional and programmatic needs of students with disabilities, a mixed-methods nationwide study of administrators was conducted. Data were collected through an internet survey delivered via email, yielding a total of 159 secondary campus-based administrators. The theoretical framework of Critical Pedagogy served as an analytical tool for investigating whether the lack of knowledge and skills of special education policy and procedures on the part of participating secondary campus-based administrators may contribute to the use of oppressive practices when serving the needs of students with disabilities. Additionally, using the lens of Critical Pedagogy, three national sets of leadership standards (CEC, 2008; ISLLC, 2008; and ELCC, 2011) for general and special education administrators were compared. The analysis of national leadership standards revealed a gradual yet limited progression toward a moral imperative (Burrello, Wayne-Sailor, & Kleinhammer-Tramill, 2012) to include more stakeholders in the education process and development of individual education programs at the secondary level for students with disabilities. Quantitative data obtained from the internet-based survey were analyzed using a frequency distribution. Using naturalistic inquiry without a predetermined focus or preordinate categories of analysis (Patton, 2002), qualitative responses to open-ended survey questions were investigated to discover and identify emergent themes. Findings indicate a breakdown in communication between administrators and students with disabilities and their families has occurred. Secondary campus-based administrators need and want more training in all areas of special education policy and procedures. Specifically they would like more coursework and professional development concerning special education law, information concerning specific disabilities, accommodations or modifications appropriate for said disabilities, RTI and Identification, discipline, understanding the IEP/BIP process, and how to work with teachers concerning special education requirements. Critical Pedagogy is advanced as a useful tool to be used by program directors for leadership preparation and professional development to assist them in determining the most appropriate and beneficial type(s) of leadership preparation, mentoring, and follow-up training to facilitate the transformation of secondary campus-based administrators' leadership practices on behalf of students with disabilities and their families.Item Legal obstacles to the use of Texas school buses for public transportation(Council for Advanced Transportation Studies, 1975-01) Means, Robert; Briggs, Ronald; Nelson, John E.; Thiemann, Alan J.Texas Education Code -- Certification -- Safety Regulations -- Appendix A. Memorandum John E. Nelson and Alan J. Thiemann Re: Use of School Buses for Public Transportation II: Requirements for Certification and Applicable Safety Regulations (With Appendices and Exhibits) -- Appendix B. Memorandum from John E. Nelson RE: Use of School Buses for Public TransportationItem RiverML: a harmonized transfer language for river hydraulic models(2014-08) Jackson, Stephen Robert; Maidment, David R.The multitude of data formats for storing river network, geometry, and flow data presents a challenge for the sharing of information both internally between software applications and externally between agencies. An analysis of existing software applications and data models used for one-dimensional hydraulic modelling of river systems was performed. The commonalities and differences between the model inputs were identified in order to determine the necessary characteristics of a common transfer language. A prototype transfer language was developed using Unified Modeling Language (UML) and implemented as an Extensible Markup Language (XML) schema. This prototype is intended to serve as a first step towards developing an international open standard to facilitate the sharing of hydraulic data. This work was performed in cooperation with the Consortium of Universities for the Advancement of Hydrologic Science, Inc. (CUAHSI) and the Open Geospatial Consortium/World Meteorological Organisation Hydrology Domain Working Group.Item Towards an Automated Methodology for Optically Cured, High Thickness Composite Polymer Pastes: An Iso-based Approach for Large Area Additive Manufacturing(2022) Kerr, C.J.; Munguia Valenzuela, J.; Nixon-Pearson, O.; Forrest, M.; Gosling, P.D.Optically cured polymer composites can offer numerous advantages over thermally- processed composites. This is especially applicable with large beads generated using Large Area Additive Manufacturing (LAAM) extrusion. This paper proposes a low-cost, semi- automated, off-the-shelf desktop system to quickly and precisely cure 8 mm thick, glass-filled (di-)methacrylate composite specimens for three-point flexural testing. In the absence of a clear preparation method for specimens of this thickness, we integrate aspects of two existing ISO Standards: ISO 178:2019, and ISO 4049:2019, to provide a rapid and reliable basis for specimen preparation and flexure testing. We propose two distinct curing strategies and compare these in terms of the flexural performance of prepared specimens, and the total cure time. Flexural data is critical to understanding the structural performance of light-activated composite pastes; and the curing methodology can be applied to potential future technologies which involve high-speed in-situ curing, from direct part/feature repair to functional production.Item Treasures and damages : portraits of veteran teachers with/in the standards era(2014-05) Flint, Mary Jo; Salinas, CinthiaThis project examined the life narratives of four veteran teachers, each of whom began their careers before the onset of the Standards Era and were still teaching in 2013. Seeking to surface both their ways of resilience and negotiations of their identities as teachers through their decades-long careers, the question is positioned in the neoliberal turmoil of high-stakes accountability, national curriculum standards, and widespread, large-N assessment, to determine if resilient, long-career teachers exhibit particular characteristics and support systems that enable their accomplished status. Using the postmodern, interpretivist methodologies of portraiture and oral history, richly contextualized narratives for each teacher were crafted as an initial analysis. A secondary analysis revealed three manifestations of identity: the socially constructed identity, the bureaucratically informed identity, and the emotionally shaped identity. Findings suggest that having a fully developed and robust set of identities might encourage teacher resilience and longevity, supporting existing bodies of research, and that storytelling is an important aspect of identity development and maintenance. An additional finding was the absence of adversity through veteran teachers’ careers, which pushes against current research on resilience, as it positions resilience against adversity. An interesting question remains, which is in what ways might these veterans have renamed themselves—through the development of multiple and fluid identities—and renamed the challenges and disruptions of their world of work so that they might continue in the classroom. As school leaders typically rely on the knowledge base of seasoned veterans—to inform curriculum development, novice teacher support, and professional learning communities—it seems important to consider the power of storytelling in those venues. In conclusion, the author suggests that the addition of research from the field of knowledge creation, usage, and stewardship could be useful to future research of veteran teachers and the ways their professional knowledge might be better leveraged for improved educational outcomes.Item What happens when the standard for openness goes unmet in romantic relationships? : cross-sectional and longitudinal analyses of stress, coping, and individual and relationship consequences(2013-08) Mooney, Charee Marshell; Vangelisti, Anita L.Individuals expect openness in their romantic relationships, and this standard, known as the standard for openness, is the focus of this project. Currently, little empirical evidence describes what individuals do to deal with any dissatisfaction, anger, and disappointment they feel toward their partners and relationships when standards, such as that for openness, go unfulfilled (Boldero et al., 2009). Based on Lazarus and Folkman's (1984) theory of stress and coping, this project's purpose was to address limitations in existing research by exploring the stress elicited when the standard for openness goes unmet, identifying the coping strategies individuals engage in when faced with this stress, and assessing the consequences of coping efforts for individuals and their relationships over time. Individuals in newly dating relationships (N = 203) responded to weekly questionnaires over the course of six weeks. Findings from cross-sectional analyses of Week 1 data revealed that exiting and using humor partially mediated the relationship between the stress associated with unfulfilled openness standards and relational satisfaction, and escaping fully mediated the relationship between stress and relationship satisfaction. Further, exiting, modeling, escaping, and reframing partially mediated the relationship between the stress associated with unfulfilled openness standards and mental well-being. Longitudinal analyses using data from all six weeks failed to support predictions that relational satisfaction and mental well-being were related to discrepancies in the fulfillment of openness standards and stress the following week.