Browsing by Subject "Asphalt mixtures"

Now showing 1 - 4 of 4

Effects of Aggregate Gradation and Angularity on VMA and Rutting Resistance
(2001-06) Park, Dae-Wook; Chowdhury, Arif; Button, Joe W.
The Superpave system adopted the voids in mineral aggregate (VMA) criteria developed by McLeod using the 75-blow Marshall compactor for conventional dense-graded hot mix asphalt (HMA) mixtures. This VMA criteria is a function of only the nominal size of aggregate regardless of shape, texture, or gradation. The Superpave volumetric mixture design process contains a required minimum value for fine aggregate angularity (FAA) as a function of traffic level and position of the layer within the pavement structure. This parameter is reported as the percentage of uncompacted air voids, with larger values generally indicating increased aggregate angularity and, thus, higher VMA and better resistance to permanent deformation. The purpose of this study was to evaluate the effects of FAA and gradation on the resulting VMA of certain HMA mixtures. The effect of FAA was evaluated using mixtures containing coarse limestone combined with six different fine aggregates. Mixtures with three gradations which pass through, above, and below the restricted zone; three different mineral filler contents; and four different values of FAA were analyzed to evaluate the effects of these parameters on VMA of Superpave mixtures. Based on analyses of these tests, mixtures containing fine granite or limestone showed less permanent deformation than mixtures containing fine river gravel or natural rounded sand. FAA values and permanent deformation did not correlate well. Gradations that pass through the restricted zone did not significantly affect mixture VMA. Mineral filler contents and FAA value did affect mixture VMA significantly. Higher FAA values yielded higher VMA.
Optimization of the number of design gyrations using the superpave gyratory compactor
(2007-05) Aguiar-Moya, Jose Pablo, 1981-; Prozzi, Jorge Alberto
This thesis investigates the effect of the laboratory compactive effort on resistance to rutting and cracking of hot-mix asphalt mixtures in Texas. With the objective of improving fatigue resistance of Texas’ asphalt mixtures, two procedures, based on a performance-related approach geared towards determining revised N-design compaction levels to increase binder contents in asphalt mixtures without compromising rutting performance, have been developed: 1) weighted combinations of performance curves, and 2) reliability-based analysis of performance. The experimental design has been devised to investigate the performance characteristics of Texas’ asphalt mixtures designed using the revised N-design. The procedure found strong support for decreasing current N-design levels under most conditions, except for high-volume facilities in warm environments. The number of design gyrations for most condition in Texas could be lowered to 75 to 85 from improved fatigue performance, without significant loss of rutting resistance.
Quantitative characterization of microstructure of asphalt mixtures to evaluate fatigue crack growth
(2012-05) Izadi, Anoosha; Bhasin, Amit; Smit, Andre
Studies show that the microstructure of the fine aggregate matrix has a significant influence on the mechanical properties and evolution of damage in an asphalt mixture. However, very little work has been done to quantitatively characterize the microstructure of the asphalt binder within the fine aggregate matrix of asphalt mixtures. The first objective of this study was to quantitatively characterize the three dimensional microstructure of the asphalt binder within the fine aggregate matrix (FAM) of an asphalt mixture and compare the influence of binder content, coarse aggregate gradation, and fine aggregate gradation on this microstructure. Studies indicate that gradation of the fine aggregate has the most influence of the degree of anisotropy whereas gradation of the coarse aggregate has the most influence on the direction anisotropy of the asphalt mastic within the fine aggregate matrix. Addition of asphalt binder or adjustments to the fine aggregate gradation also resulted in a more uniform distribution of the asphalt mastic within the fine aggregate matrix. The second objective of this study was to compare the internal microstructure of the mortar within a full-scale asphalt mixture to the internal microstructure of the FAM specimen and also conduct a limited evaluation of the influence of mixture properties and methods of compaction on the engineering properties of the FAM specimens. Fatigue cracking is a significant form of pavement distress in flexible pavements. The properties of the sand-asphalt mortars or FAM can be used to characterize the evolution of fatigue crack growth and self-healing in full-scale asphalt mixtures. The results from this study, although limited in number, indicate that in most cases the SGC (Superpave Gyratory Compactor) compacted FAM specimen had a microstructure that most closely resembled the microstructure of the mortar within a full-scale asphalt mixture. Another finding from this study was that, at a given level of damage, the healing characteristic of the three different types of FAM mixes evaluated was not significantly different. This indicates that the healing rate is mostly dictated by the type of binder and not significantly influenced by the gradation or binder content, as long as the volumetric distribution of the mastic was the same.
Role of Aggregate Characteristics to Load in SMA
(2006-08) Gatchalian, Dennis; Masad, Eyad; Chowdhury, Arif; Little, Dallas N.
Stone matrix asphalt (SMA) mixtures rely on stone-on-stone contacts among particles to resist applied forces and permanent deformation. Aggregates in SMA should resist degradation (fracture and abrasion) under high stresses at the contact points. This study utilizes conventional techniques as well as advanced imaging techniques to evaluate aggregate characteristics and their resistance to degradation. Aggregates from different sources and types with various shape characteristics were used in this study. The Micro-Deval test was used to measure aggregate resistance to abrasion. The aggregate imaging system (AIMS) was then used to examine the changes in aggregate characteristics caused by abrasion forces in the Micro-Deval. The resistance of aggregates to degradation in SMA was evaluated through the analysis of aggregate gradation before and after compaction using conventional mechanical sieve analysis and nondestructive X-ray computed tomography (CT). The findings of this study led to the development of an approach for the evaluation of aggregate resistance to degradation in SMA. This approach measures aggregate degradation in terms of abrasion, breakage, and loss of texture.