Experimental measurement of sweep efficiency during multi-phase displacement in the presence of nanoparticles

dc.contributor.advisorDiCarlo, David Anthony, 1969-
dc.creatorAminzadeh Goharrizi, Behdaden
dc.date.accessioned2013-07-24T16:56:25Zen
dc.date.issued2013-05en
dc.date.submittedMay 2013en
dc.date.updated2013-07-24T16:56:25Zen
dc.descriptiontexten
dc.description.abstractThe efficiency of one fluid displacing another in permeable media depends greatly on the pore-scale dynamics at the main wetting front. Experiments have shown that the frontal dynamics can result in two different flow regimes: a stable and an unstable front. In stable displacements, any perturbation of the front will diminish with time and the effect of variation in permeability will be lessened. In contrast, in unstable displacements any perturbation of the front will grow with time and any variation in permeability will be magnified. In this dissertation, the stability of two different displacement processes are contemplated; a) vertical infiltration of dense liquid into dry sand from above and b) horizontal displacement of nanoparticle suspension with high pressure liquid CO₂. Significant insights are obtained by measuring the in-situ flow patterns in real time with a light transmission method and CT scanning. Vertical infiltration of dense fluid into dry sands from above is often observed to be unstable and produce gravity driven fingers. The formation of gravity fingers can have large consequences on the sweep efficiency of a displacement. Infiltration experiments showed that gravity driven fingers have a unique saturation profile known as saturation overshoot with a higher saturation at the finger tips than the saturation at the finger tail. Despite the vast number of theoretical and experimental investigations, conditions under which the front is unstable, remain unclear. To determine what controls the saturation overshoot and how it relates to the dynamics at the initial wetting front, saturation overshoot was measured as a function of flux for seven different liquids. These liquids gave a range of molecular weights, viscosities, and vapor pressures. It is found that for each fluid there is a flux (called overshoot flux) below which saturation overshoot ceases and the front is diffuse. The magnitude of the overshoot flux depends inversely on the invading fluid's viscosity and shows little or no dependence on the invading fluid's surface tension, vapor pressure, or miscibility with water. Since the saturation overshoot is not described by the continuum multi-phase flow models, the experimental results are used to develop a semi-continuum model that bridges the continuum-scale and pore-scale physics. The proposed model predicts the observed dependence of overshoot on media permeability and invading fluid properties. At the planned depth for CO₂ injection, either as an enhanced oil recovery technique or for CO₂ storage, CO₂ is typically less dense and less viscous than the in-situ fluid. Therefore, CO₂ injection is unstable and produces viscous fingers. This can greatly reduce the efficiency of a CO₂ flood or CO₂ storage capacity of an aquifer. To remedy this behavior, surface treated nanoparticles were used to reduce the mobility of injected CO₂. Displacement experiments were performed at low pressure with a CO₂ analogue (n-octane) fluid and at high pressure with liquid CO₂. Saturation distributions and pressure drops were measured in real time with the CT scanner when high pressure liquid CO₂ or n-octane was used to displace brine in different cores with and without suspended nanoparticles. In the presence of nanoparticles, the displacement front is more spatially uniform with a later breakthrough compared to the same experiment with no suspended nanoparticles. These observations suggest that nanoparticle stabilized foam, which forms during the displacement, acts to suppress the instability. It is argued that the generation of droplets occurs at the leading front of all drainage displacements. In the presence of nanoparticles, these droplets are preserved when nanoparticle adhere at the fluid-fluid interface. The new mechanism for foam generation described here, provides an interesting alternative for mobility control in CO₂ floods. Moreover, the same mechanism can potentially a) increase the CO₂ storage capacity of an aquifer, b) enhance the CO₂ capillary trapping, and c) provide an engineered barrier to CO₂ leakage from a storage sites, thereby alleviating the risk of contaminating the overlying fresh groundwater resources for CO₂ storage projects.en
dc.description.departmentPetroleum and Geosystems Engineeringen
dc.format.mimetypeapplication/pdfen
dc.identifier.urihttp://hdl.handle.net/2152/20901en
dc.language.isoen_USen
dc.subjectNanoparticleen
dc.subjectCO₂ EORen
dc.subjectCarbon storageen
dc.subjectSaturation overshooten
dc.subjectSweep efficiencyen
dc.titleExperimental measurement of sweep efficiency during multi-phase displacement in the presence of nanoparticlesen
thesis.degree.departmentPetroleum and Geosystems Engineeringen
thesis.degree.disciplinePetroleum Engineeringen
thesis.degree.grantorThe University of Texas at Austinen
thesis.degree.levelDoctoralen
thesis.degree.nameDoctor of Philosophyen
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
AMINZADEHGOHARRIZI-DISSERTATION-2013.pdf
Size:
11.84 MB
Format:
Adobe Portable Document Format
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
LICENSE.txt
Size:
1.86 KB
Format:
Plain Text
Description: