Superposition in the leading edge region of a film cooled gas turbine vane

dc.contributor.advisorBogard, David G.
dc.creatorAnderson, Joshua Brianen
dc.date.accessioned2014-04-04T15:14:28Zen
dc.date.issued2013-12en
dc.date.submittedDecember 2013en
dc.date.updated2014-04-04T15:14:28Zen
dc.descriptiontexten
dc.description.abstractThe leading edge of a turbine vane is subject to some of the highest temperature loading within an engine, and an accurate understanding of leading edge film coolant behavior is essential to efficient engine design. Although there have been many investigations of the adiabatic effectiveness for showerhead film cooling within the leading edge region, there have been no previous studies in which individual rows of the showerhead were tested with the explicit intent of validating superposition models. For the current investigation, a series of adiabatic effectiveness experiments were performed with a five-row showerhead, wherein each row of holes was operated in isolation. This allowed evaluation of superposition on both the suction side of the vane, which was moderately convex, and the pressure side of the vane, which was mildly concave. Superposition was found to accurately predict performance on the suction side of the vane at lower momentum flux ratios, but not for higher momentum flux ratios. On the pressure side of the vane, the superposition predictions were consistently lower than measured values, with significant under-prediction of adiabatic effectiveness occurring at the higher mass flow rates. Possible reasons for the under-prediction of effectiveness by the superposition model are presented.en
dc.description.departmentMechanical Engineeringen
dc.format.mimetypeapplication/pdfen
dc.identifier.urihttp://hdl.handle.net/2152/23792en
dc.subjectGas turbineen
dc.subjectFilm coolingen
dc.subjectLeading edgeen
dc.subjectSuperpositionen
dc.subjectIR thermographyen
dc.subjectWind tunnelen
dc.subjectExperimentalen
dc.titleSuperposition in the leading edge region of a film cooled gas turbine vaneen
dc.typeThesisen
thesis.degree.departmentMechanical Engineeringen
thesis.degree.disciplineMechanical Engineeringen
thesis.degree.grantorThe University of Texas at Austinen
thesis.degree.levelMastersen
thesis.degree.nameMaster of Science in Engineeringen

Access full-text files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
ANDERSON-THESIS-2013.pdf
Size:
6.75 MB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
LICENSE.txt
Size:
1.84 KB
Format:
Plain Text
Description: