Synthesis of cross-linked sulfonated polysulfone and mechanical properties of SPEEK-based membranes for direct methanol fuel cells

dc.contributor.advisorManthiram, Arumugamen
dc.contributor.committeeMemberMeyers, Jeremy P.en
dc.creatorZieren, Shelley Marieen
dc.date.accessioned2011-07-08T20:01:39Zen
dc.date.available2011-07-08T20:01:39Zen
dc.date.issued2011-05en
dc.date.submittedMay 2011en
dc.date.updated2011-07-08T20:01:51Zen
dc.descriptiontexten
dc.description.abstractDirect methanol fuel cells (DMFC) are being investigated for use as low-power electrochemical energy conversion devices. These types of fuel cells can be useful for portable electronics. The polymer electrolyte membrane plays a critical role in the overall performance of DMFC. The commercially available membrane, Nafion, suffers from high methanol permeability and a resulting methanol crossover from the anode to the cathode; it is also expensive. Accordingly, alternative membrane materials, such as sulfonated hydrocarbons, are intensively pursued for DMFC. For example, sulfonated poly (ether ether ketone) (SPEEK) and sulfonated polysulfone (SPsf) are two such candidates. This thesis focuses first on a simple synthesis method for a cross-linked sulfonated polysulfone membrane. Sulfonated polysulfone (Psf) membranes, with high IEC (1.4 - 2.2 meq/g), were characterized by nuclear magnetic resonance spectroscopy (NMR), proton conductivity, and water uptake. The degree of sulfonation was calculated by NMR and verified by acid-base titration analysis. Although the membranes showed good proton conductivity, they suffered from excessive swelling at high temperatures. Furthermore, the post-sulfonation of a carboxyl-substituted polysulfone (Psf-COOH) was carried out with trimethylsilyl chlorosulfonate, and solubility issues of the Psf-COOH in chlorinated solvents led to difficulty in controlling the degree of sulfonation (DS) and in purification. Accordingly, this approach to cross-linking sulfonated polysulfone was rejected as a viable method. This thesis then focused on the investigation of the mechanical properties of acid-base blend membranes based on SPEEK and heterocycle-tethered Psf and cross-linked membranes based on SPEEK that were previously reported by our group; these membranes were known to exhibit good performance in DMFC. However, the assessment of the mechanical stability of any new membranes developed is critical for their practical viability in DMFC. Accordingly, the mechanical strength and ductility of these membranes were investigated and compared for various membrane compositions. The acid-base blend membranes investigated consisted of SPEEK (acidic polymer) and a heterocycle-tethered Psf (basic polymer); for example, blends consisting of SPEEK and amino-benzimidazole-tethered Psf (SPEEK/Psf-ABIm) and SPEEK and benzotriazole tethered Psf (SPEEK/Psf-Btraz) were investigated. The cross-linked SPEEK was made by Friedel-Craft acylation with Psf-COOH (DS = 1 or 2). The two blend membranes showed superior mechanical properties compared to Nafion 115 and comparable to plain SPEEK. The crosslinked membranes showed good mechanical properties and better strength than Nafion 115, but they were more brittle than both Nafion 115 and plain SPEEK. Further optimization of cross-linking conditions is necessary to produce the best performing membrane.en
dc.description.departmentMaterials Science and Engineeringen
dc.format.mimetypeapplication/pdfen
dc.identifier.slug2152/ETD-UT-2011-05-3418en
dc.identifier.urihttp://hdl.handle.net/2152/ETD-UT-2011-05-3418en
dc.language.isoengen
dc.subjectDirect methanol fuel cellsen
dc.subjectPolymer electrolyte membranesen
dc.subjectSPEEKen
dc.subjectPolysulfoneen
dc.subjectAcid-base blend membranesen
dc.titleSynthesis of cross-linked sulfonated polysulfone and mechanical properties of SPEEK-based membranes for direct methanol fuel cellsen
dc.type.genrethesisen
thesis.degree.departmentMaterials Science and Engineeringen
thesis.degree.disciplineMaterials Science and Engineeringen
thesis.degree.grantorUniversity of Texas at Austinen
thesis.degree.levelMastersen
thesis.degree.nameMaster of Science in Engineeringen

Access full-text files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
ZIEREN-THESIS.pdf
Size:
4.23 MB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
2.12 KB
Format:
Plain Text
Description: