Research on Relationship between Depth of Fusion and Process Parameters in Low-Temperature Laser Sintering Process

dc.creatorKigure, T.
dc.creatorYamauchi, Y.
dc.creatorNiino, T.
dc.date.accessioned2021-11-16T15:11:38Z
dc.date.available2021-11-16T15:11:38Z
dc.date.issued2018
dc.description.abstractModel of low-temperature laser sintering, in which part warpage during process is prevented by anchoring of parts instead of high-temperature preheating, is discussed. Low-temperature laser sintering process allows powder bed temperature to be lower than those in normal laser sintering process which suppresses parts warpage by preheating powder bed above its recrystallization temperature. When we introduce a new process or material, many experimental examinations are required to decide adequate building conditions. To reduce this process, theoretical process modeling and simulations are carried out. In stereolithography, relationship between laser irradiance and cure depth is known as “working curve,” and used for fundamental equation for this technology. On the other hand, many theoretical models for laser sintering have been introduced, and most of them are thermal models dealing with heat transfer in powder bed. Contrarily, there are few reports concerning measurement and calculation of fusion depth though fusion depth can be obtained easily by experiment and working curve is a useful to determination of building parameters. In this study, working curve which represents relationship between part thickness obtained by monolayer scan and incident energy was investigated. As a result of normalizing the power by the minimum power that can melt the surface of the powder bed, all the plots lay on the same single line. This line, namely master curve, is unique for each powder and useful to finding various parameters.en_US
dc.description.departmentMechanical Engineeringen_US
dc.identifier.urihttps://hdl.handle.net/2152/90308
dc.identifier.urihttp://dx.doi.org/10.26153/tsw/17229
dc.language.isoengen_US
dc.publisherUniversity of Texas at Austinen_US
dc.relation.ispartof2018 International Solid Freeform Fabrication Symposiumen_US
dc.rights.restrictionOpenen_US
dc.subjectworking curveen_US
dc.subjectdepth of fusionen_US
dc.subjectprocess parameteren_US
dc.subjectpart thicknessen_US
dc.subjectincident energyen_US
dc.subjectlow-temperature laser sinteringen_US
dc.subjectlaser sinteringen_US
dc.titleResearch on Relationship between Depth of Fusion and Process Parameters in Low-Temperature Laser Sintering Processen_US
dc.typeConference paperen_US

Access full-text files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
2018-194-Kigure.pdf
Size:
635.79 KB
Format:
Adobe Portable Document Format
Description:

License bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.64 KB
Format:
Item-specific license agreed upon to submission
Description: