Methods of Extrusion on Demand for High Solids Loading Ceramic Paste in Freeform Extrusion Fabrication

Access full-text files

Date

2015

Authors

Li, Wenbin
Ghazanfari, Amir
Leu, Ming C.
Landers, Robert G.

Journal Title

Journal ISSN

Volume Title

Publisher

University of Texas at Austin

Abstract

Fabrication of highly dense parts with complex geometry by paste-extrusion-based solid freeform fabrication processes requires a precise control of the extrusion flow rate to dispense material on demand, which is often referred as Extrusion-On-Demand (EOD). The extrusion process for aqueous ceramic pastes is complex and difficult to control due to their non-Newtonian behavior, compressibility and inhomogeneity. In this study, three methods of EOD (based on ram extruder, needle valve, and auger valve) are introduced and investigated for the extrusion of high solids loading (i.e., >50%, volumetric) aqueous alumina paste. Optimal extrusion process parameters for these methods are determined through printing tests and analysis. The extrusion performance in terms of extrusion start and stop accuracy, as well as flow rate consistency, is compared and analyzed for the three methods. Advantages and disadvantages of these three methods are also discussed.

Description

LCSH Subject Headings

Citation