A study of shear behavior of reinforced concrete deep beams

Date

2013-12

Authors

Nguyen, Phu Trong, active 21st century

Journal Title

Journal ISSN

Volume Title

Publisher

Abstract

Reinforced concrete deep beams are vital structural members serving as load transferring elements. The behavior of reinforced concrete deep beams is complex. Nonlinear distribution of strain and stress must be considered. Prior to 1999, ACI 318 Codes included an empirical design equation for reinforced concrete deep beams. Since 2002, the strut and tie model and nonlinear analysis have been required. However, both methods have disadvantages of complexity or lack of transparency. The objective of this study is to produce a simple, reliable design equation for reinforced concrete deep beams. A nonlinear finite element program, ATENA, was used for analyzing and predicting the behavior of concrete and reinforced concrete structures. First, applicability of ATENA was verified by developing the computer models of simply supported and two span continuous deep beams based on Birrcher’s tests of simply supported deep beams. Tests by Rogowsky and Macgregor and by Ashour are the basis for the models of continuous two span deep beams. Those tests were selected because the researchers reported adequate details of the experimental program and on specimen behavior. Then a series of simply supported and two span continuous deep beam models were developed based on the details and geometry of Birrcher's beams. The computer models were used to investigate the following parameters: the compressive strength of concrete, shear span to depth ratios, longitudinal reinforcement ratios, web reinforcement, effect of member depth, and loading conditions. Finally, a proposed design equation for shear strength of reinforced concrete deep beams was derived based on the observed the behavior of reinforced concrete deep beam tests, the results of the analytical study, and a plastic truss model. The proposed equations were in good agreement with test values and provide an alternate approach to current design procedures for deep beams.

Description

text

LCSH Subject Headings

Citation