PROCESS-INTEGRATED ALLOY ADJUSTMENT IN LASER DEPOSITION WELDING WITH TWO WIRES

Access full-text files

Date

2023

Authors

Budde, L.
Schwarz, N.
Hermsdorf, J.
Kaierle, S.
Overmeyer, L.

Journal Title

Journal ISSN

Volume Title

Publisher

University of Texas at Austin

Abstract

For Direct Energy Deposition (DED) with wire as filler material, the material selection is mostly limited to commercially available welding wires. This limits the achievable material properties for cladding and Additive Manufacturing purposes. Using a coaxial deposition welding head, in which two different wires can be fed and controlled individually, the alloy composition can be adjusted in the common process zone in-situ. In this study, the two wire materials AISI 316L and ER 70S-6 are used in different mixing ratios to fabricate single weld seams. The different mixing ratios are achieved by varying the wire feed rates. The material content in the weld is varied between 0% and 100% in 20% steps. The weld seams are examined with regard to the distribution of alloying elements, hardness and microstructure. Homogeneous mixing of the two materials was achieved at all mixing ratios. At a content of 40% or more of ER 70S-6 in the weld seam, there was a drastic change in the microstructure and a significant increase in hardness. The microstructure changed from austenitic to ferritic-pearlitic, which was accompanied by an increase in hardness from 170 HV0.1 to 428 HV0.1.

Description

LCSH Subject Headings

Citation