Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy
| dc.creator | Fischer, M. | |
| dc.creator | Schöppner, V. | |
| dc.date.accessioned | 2021-10-18T20:32:46Z | |
| dc.date.available | 2021-10-18T20:32:46Z | |
| dc.date.issued | 2014 | |
| dc.description.abstract | Fused Deposition Modeling (FDM) parts are prone to process-related rough and wavy surfaces with stair-stepping effects whenever the parts produced have sloped or rounded geometries. These stair-stepping effects can be reduced by using a smaller slice height, but complete elimination is not possible. In this paper, FDM parts manufactured with the material ABS-M30 are finished using mass finishing methods. The mass finishing is done with a trough vibrator, which is comparatively gentle to the parts in comparison to other mass finishing technologies. The analysis discusses the surface-smoothing effect of finishing time and intensity on various part sizes and build orientations. In addition, the dimensional accuracy of the parts after the finishing process is examined. | en_US |
| dc.description.department | Mechanical Engineering | en_US |
| dc.identifier.uri | https://hdl.handle.net/2152/89236 | |
| dc.language.iso | eng | en_US |
| dc.publisher | University of Texas at Austin | en_US |
| dc.relation.ispartof | 2014 International Solid Freeform Fabrication Symposium | en_US |
| dc.rights.restriction | Open | en_US |
| dc.subject | Fused Deposition Modeling | en_US |
| dc.subject | ABS-M30 | en_US |
| dc.subject | mass finishing | en_US |
| dc.subject | dimensional accuracy | en_US |
| dc.title | Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy | en_US |
| dc.type | Conference paper | en_US |