Simulation and analysis of wind turbine loads for neutrally stable inflow turbulence

dc.contributor.advisorManuel, Lanceen
dc.contributor.committeeMemberKallivokas, Loukas F.en
dc.creatorSim, Chungwooken
dc.date.accessioned2010-06-04T14:44:43Zen
dc.date.available2010-06-04T14:44:43Zen
dc.date.issued2009-08en
dc.date.submittedAugust 2009en
dc.descriptiontexten
dc.description.abstractEfficient temporal resolution and spatial grids are important in simulation of the inflow turbulence for wind turbine loads analyses. There have not been many published studies that address optimal space-time resolution of generated inflow velocity fields in order to estimate accurate load statistics. This study investigates turbine extreme and fatigue load statistics for a utility-scale 5MW wind turbine with a hub-height of 90 m and a rotor diameter of 126 m. Load statistics, spectra, and time-frequency analysis representations are compared for various alternative space and time resolutions employed in inflow turbulence field simulation. Conclusions are drawn regarding adequate resolution in space of the inflow turbulence simulated on the rotor plane prior to extracting turbine load statistics. Similarly, conclusions are drawn with regard to what constitutes adequate temporal filtering to preserve turbine load statistics. This first study employs conventional Fourier-based spectral methods for stochastic simulation of velocity fields for a neutral atmospheric boundary layer. In the second part of this study, large-eddy simulation (LES) is employed with similar resolutions in space and time as in the earlier Fourier-based simulations to again establish turbine load statistics. A comparison of extreme and fatigue load statistics is presented for the two approaches used for inflow field generation. The use of LES-generated flows (enhanced in deficient high-frequency energy by the use of fractal interpolation) to establish turbine load statistics in this manner is computationally very expensive but the study is justified in order to evaluate the ability of LES to be used as an alternative to more common approaches. LES with fractal interpolation is shown to lead to accurate load statistics when compared with stochastic simulation. A more compelling reason for using LES in turbine load studies is the following: for stable boundary layers, it is not possible to generate realistic inflow velocity fields using stochastic simulation. The present study presents a demonstration that, despite the computational costs involved, LES-generated inflows can be used for loads analyses for utility-scale turbines. The study sets the stage for future computations in the stable boundary layer where low-level jets, large speed and direction shears across the rotor, etc. can possibly cause large turbine loads; then, LES will likely be the inflow turbulence generator of choice.en
dc.description.departmentCivil, Architectural, and Environmental Engineeringen
dc.format.mimetypeapplication/pdfen
dc.identifier.urihttp://hdl.handle.net/2152/ETD-UT-2009-08-387en
dc.language.isoengen
dc.subjectutility-scale wind turbineen
dc.subjectneutral atmospheric boundary layeren
dc.subjectinflow turbulenceen
dc.subjectLarge-Eddy Simulationen
dc.subjectstochastic simulationen
dc.subjectfractal interpolationen
dc.subjectextreme and fatigue load statisticsen
dc.subjectwind turbine loadsen
dc.titleSimulation and analysis of wind turbine loads for neutrally stable inflow turbulenceen
dc.type.genrethesisen
thesis.degree.departmentCivil, Architectural, and Environmental Engineeringen
thesis.degree.disciplineCivil Engineeringen
thesis.degree.grantorThe University of Texas at Austinen
thesis.degree.levelMastersen
thesis.degree.nameMaster of Science in Engineeringen
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
ChungwookSim_Master_Thesis_Civil_Summer09.pdf
Size:
11.87 MB
Format:
Adobe Portable Document Format
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
2.12 KB
Format:
Plain Text
Description: