Parallel simulation of coupled flow and geomechanics in porous media

dc.contributor.advisorWheeler, Mary F. (Mary Fanett)
dc.creatorWang, Bin, 1984-en
dc.date.accessioned2015-01-16T16:19:38Zen
dc.date.issued2014-12en
dc.date.submittedDecember 2014en
dc.date.updated2015-01-16T16:19:39Zen
dc.descriptiontexten
dc.description.abstractIn this research we consider developing a reservoir simulator capable of simulating complex coupled poromechanical processes on massively parallel computers. A variety of problems arising from petroleum and environmental engineering inherently necessitate the understanding of interactions between fluid flow and solid mechanics. Examples in petroleum engineering include reservoir compaction, wellbore collapse, sand production, and hydraulic fracturing. In environmental engineering, surface subsidence, carbon sequestration, and waste disposal are also coupled poromechanical processes. These economically and environmentally important problems motivate the active pursuit of robust, efficient, and accurate simulation tools for coupled poromechanical problems. Three coupling approaches are currently employed in the reservoir simulation community to solve the poromechanics system, namely, the fully implicit coupling (FIM), the explicit coupling, and the iterative coupling. The choice of the coupling scheme significantly affects the efficiency of the simulator and the accuracy of the solution. We adopt the fixed-stress iterative coupling scheme to solve the coupled system due to its advantages over the other two. Unlike the explicit coupling, the fixed-stress split has been theoretically proven to converge to the FIM for linear poroelasticity model. In addition, it is more efficient and easier to implement than the FIM. Our computational results indicate that this approach is also valid for multiphase flow. We discretize the quasi-static linear elasticity model for geomechanics in space using the continuous Galerkin (CG) finite element method (FEM) on general hexahedral grids. Fluid flow models are discretized by locally mass conservative schemes, specifically, the mixed finite element method (MFE) for the equation of state compositional flow on Cartesian grids and the multipoint flux mixed finite element method (MFMFE) for the single phase and two-phase flows on general hexahedral grids. While both the MFE and the MFMFE generate cell-centered stencils for pressure, the MFMFE has advantages in handling full tensor permeabilities and general geometry and boundary conditions. The MFMFE also obtains accurate fluxes at cell interfaces. These characteristics enable the simulation of more practical problems. For many reservoir simulation applications, for instance, the carbon sequestration simulation, we need to account for thermal effects on the compositional flow phase behavior and the solid structure stress evolution. We explicitly couple the poromechanics equations to a simplified energy conservation equation. A time-split scheme is used to solve heat convection and conduction successively. For the convection equation, a higher order Godunov method is employed to capture the sharp temperature front; for the conduction equation, the MFE is utilized. Simulations of coupled poromechanical or thermoporomechanical processes in field scales with high resolution usually require parallel computing capabilities. The flow models, the geomechanics model, and the thermodynamics model are modularized in the Integrated Parallel Accurate Reservoir Simulator (IPARS) which has been developed at the Center for Subsurface Modeling at the University of Texas at Austin. The IPARS framework handles structured (logically rectangular) grids and was originally designed for element-based data communication, such as the pressure data in the flow models. To parallelize the node-based geomechanics model, we enhance the capabilities of the IPARS framework for node-based data communication. Because the geomechanics linear system is more costly to solve than those of flow and thermodynamics models, the performance of linear solvers for the geomechanics model largely dictates the speed and scalability of the coupled simulator. We use the generalized minimal residual (GMRES) solver with the BoomerAMG preconditioner from the hypre library and the geometric multigrid (GMG) solver from the UG4 software toolbox to solve the geomechanics linear system. Additionally, the multilevel k-way mesh partitioning algorithm from METIS is used to generate high quality mesh partitioning to improve solver performance. Numerical examples of coupled poromechanics and thermoporomechanics simulations are presented to show the capabilities of the coupled simulator in solving practical problems accurately and efficiently. These examples include a real carbon sequestration field case with stress-dependent permeability, a synthetic thermoporoelastic reservoir simulation, poroelasticity simulations on highly distorted hexahedral grids, and parallel scalability tests on a massively parallel computer.en
dc.description.departmentEngineering Mechanicsen
dc.format.mimetypeapplication/pdfen
dc.identifier.urihttp://hdl.handle.net/2152/28061en
dc.language.isoenen
dc.subjectIterative couplingen
dc.subjectFixed-stress spliten
dc.subjectLinear elasticityen
dc.subjectThermoporoelasticityen
dc.subjectCompositional flowen
dc.subjectStress-dependent permeabilityen
dc.subjectMultipoint fluxen
dc.subjectGeneral hexahedral griden
dc.subjectParallel simulationen
dc.titleParallel simulation of coupled flow and geomechanics in porous mediaen
dc.typeThesisen
thesis.degree.departmentEngineering Mechanicsen
thesis.degree.disciplineEngineering Mechanicsen
thesis.degree.grantorThe University of Texas at Austinen
thesis.degree.levelDoctoralen
thesis.degree.nameDoctor of Philosophyen

Access full-text files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
WANG-DISSERTATION-2014.pdf
Size:
8.18 MB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
LICENSE.txt
Size:
1.84 KB
Format:
Plain Text
Description: