Show simple item record

dc.creatorNiino, T.
dc.creatorYamada, H.
dc.date.accessioned2020-02-13T21:09:28Z
dc.date.available2020-02-13T21:09:28Z
dc.date.issued2004-08-04
dc.identifier.urihttps://hdl.handle.net/2152/79981
dc.identifier.urihttp://dx.doi.org/10.26153/tsw/7006
dc.description.abstractAmong commercially available rapid prototyping processes, SLS is the most effective in terms of adaptability of various materials. However, rapid prototyped parts by the process are always porous and the physical properties of the parts are different from dense parts which is to be used in final product. This paper introduces a post process that can densify SLS processed plastic parts to almost 100%. An SLS processed polystyrene part is densified and, resultantly, a much stronger and transparent part is obtained.en_US
dc.language.isoengen_US
dc.relation.ispartof2004 International Solid Freeform Fabrication Symposiumen_US
dc.subjectstereolithographyen_US
dc.titleFull-Densification of SLS Parts by Re-Melting 400en_US
dc.typeConference paperen_US
dc.description.departmentMechanical Engineeringen_US
dc.rights.restrictionOpenen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record