Localization and detection of wireless embeddable structural sensors using an unmanned aerial vehicle in the absence of visual markers

The objective of this thesis is to develop a fully integrated UAV based platform for autonomous collection of data from embedded sensors. Passive (battery-less) embedded sensors provide means for periodic long-term monitoring of civil structures like bridges. However, collection of data from these sensors requires extensive manual effort of locating them. UAVs can automate this process, although localization of these embedded tags in absence of visual markers pose a challenge. A RF (13.56MHz) reader is used to capture data from RF tags wirelessly. Different tag coil sizes are tested to observe effects on read range as well as to characterize the interaction volume between reader and tag. The UAV platform is integrated with the RF reader to autonomously capture data from tags using GPS based localization. Different sensor configurations are tested and characterized to meet the requirements of X,Y,Z localization set by the reader and tag interaction volume. Flight characteristics are also observed for various UAV navigation parameters. Results suggest that by using low-cost RTK GPS unit, the UAV is capable of detecting and localizing RF tags without any visual markers or aides.