Show simple item record

dc.creatorElkins, Kurt
dc.creatorNordby, Howard
dc.creatorJanak, Christopher
dc.creatorGray IV, Robert W.
dc.creatorHelge Bohn, Jan
dc.creatorBaird, Donald G.
dc.date.accessioned2018-12-05T20:29:54Z
dc.date.available2018-12-05T20:29:54Z
dc.date.issued1997
dc.identifierdoi:10.15781/T2833NJ55
dc.identifier.urihttp://hdl.handle.net/2152/71413
dc.description.abstractThis paper describes an ongoing effort towards extending the capabilities of the fused deposition modeling (FDM) process to soft thermoplastic elastomers (STPEs). Two thermoplastic elastomers with hardness of 72 and 78 Shore A, respectively, have been processed into 0.070" (1.78 mm) filament stock for use in the FDM 1600 rapid prototyping system. The FDM 1600 liquifier subsystem has been modified to accommodate the reduced column strength ofthe STPE filament stock. Sample STPE parts have been fabricated with ABS material support structures.en_US
dc.language.isoengen_US
dc.relation.ispartof1997 International Solid Freeform Fabrication Symposiumen_US
dc.subjectaircrewoxygenen_US
dc.subjectSTPEen_US
dc.titleSoft Elastomers for Fused Deposition Modelingen_US
dc.typeConference paperen_US
dc.description.departmentMechanical Engineeringen_US
dc.rights.restrictionOpenen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record