Browsing 1998 International Solid Freeform Fabrication Symposium by Title
Now showing items 27-46 of 85
-
Gas-Phase Selective Area Laser Deposition(SALD) Joining of SiC Tubes with SiC Filler Materia
(1998)The laser-driven, gas-phase based SFF technique for joining together ceramic components with ceramic filler material, known as Selective Area Laser Deposition(SALD) Joining, was utilized in fabricating joined silicon ... -
Generation of Porous Structures Using Fused Deposition
(1998)The Fused Deposition Modeling process uses hardware and software machine-level language that are very similar to that of a pen-plotter. Consequently, the·use of patterns with poly-lines as basic geometric features, instead ... -
Geometry Processing for SLS/HIP
(1998)SLS/HIP is a new net shape manufacturing method that combines the strengths of direct selective laser sintering and hot isostatic pressing. Direct selective laser sintering is a rapid manufacturing technique that ... -
Industrial Use of Direct Metal Laser Sintering
(1998)The Direct Metal Laser Sintering (DMLS) process was developed a few years ago by Electrolux Rapid Development (ERD) and EOS. DMLS has now been in commercial use for more than two years at Electrolux and also at other ... -
Influence of Rheology on Deposition Behavior of Ceramic Pastes in Direct Fabrication Systems
(1998)Rheology and deposition behavior offour commercially available thick-film inks and an aqueous alumina slurry were investigated using two different slurry-based deposition systems. The first ofthese deposition systems, a ... -
Investigation of Short Pulse Nd:YAG Laser Interaction with Stainless Steel Powder Beds
(1998)The development of metallic object construction has occurred at quite a pace over the last five years with provision of many commercial techniques such as indirect and direct sintering of metal powder beds. Although ... -
Laser Polishing of Silica Rods
(1998)Lasers have been widely used in surface modification. In this research a CO2 continuous wave laser has been used to polish the slot surface of the silica rods. The strong absorption of the lO.6 um C02 radiation by the ... -
Machine Design, Control and Performance of Automated Computer-Aided Manufacturing of Laminated Engineering Materials
(1998)This paper describes machine design and control aspects of automating a viable CAM-LEM layered manufacturing process. The cut-then-stack sheet-based approach permits using sheet materials of different thicknesses, enabling ... -
Material Strength in Polymer Shape Deposition Manufacturing
(1998)Shape Deposition Manufacturing (SDM) is a layered manufacturing process involving an iterative combination of material addition and material removal. Polymer SDM processes have used castable thermoset resins to build a ... -
Materials for Biomedical Applications
(1998)This paper discusses two ceramic material systems for selective laser sintering (SLS) that are being developed for biomedical applications for use in repair of bone defects. SLS is the preferred method of fabricating ... -
Materials Issues in Laminated Object Manufacturing of Powder-Based Systems
(1998)Laminated object manufacturing offine ceramic and powder metallurgy components can be carried out using either the cut-then-stack or stack-then-cut motif. With either approach, it is necessary to effect laser cutting to ... -
Measurement and Modeling of Residual Stress-Induced Warping in Direct Metal Deposition Processes
(1998)Tolerance loss due to residual stress-induced warping is a major concern in solid freeform fabrication (SFF) processes. An understanding of how residual stresses develop and how they lead to tolerance loss is a key issue ... -
Mechanical Behavior of Robocast Alumina
(1998)Direct fabrication of alumina parts by robocasting was completed. This method is based on three-dimensional deposition of binderless aqueous alumina slurries. Parts were made with different deposition paths and ... -
Mechanical Characterization of Parts Processed via Fused Deposition
(1998)The possibility of using materials with better physical and mechanical properties together with the quickly improving capabilities of various processes increasingly make Rapid Prototyping (RP) as a new manufacturing ... -
Modeling and Designing Components with Locally Controlled Composition
(1998)SFF processes have demonstrated the ability to produce parts with locally controlled composition. In the limit, processes such as 3D Printing,cancreate parts with composition control on thelength scaleiof 100 ... -
Parametric Based Controller for Rapid Prototyping Applications
(1998)A methodology aiming at reproducing in Rapid Prototyping applications, exact parametric curves from CAD data is presented. The approach consists of converting the space-based parametric curves from the CAD system into ... -
Powder Deposition and Sintering for a Two-Powder Approach to Solid Freeform Fabrication
(1998)A two-powder approach is presented where Fused Deposition modeling (FDM) is used to create a thin shell in the shape of the part to be fabricated. The shell is filled with powder of the part material and surrounded by a ... -
Preparation and Properties of In-Situ Devices Using the SALD and SALDVI Techniques
(1998)One of the many advantages of Selective Area Laser Deposition (SALD) and Selective Area Laser Deposition Vapor Infiltration (SALDVI) is that they can be used to embed in-situ micro-sensors within macro-components. A ...
