Show simple item record

dc.creatorCarleberg, Per
dc.date.accessioned2018-10-03T15:54:34Z
dc.date.available2018-10-03T15:54:34Z
dc.date.issued1994
dc.identifierdoi:10.15781/T20R9MP3X
dc.identifier.urihttp://hdl.handle.net/2152/68654
dc.description.abstractThe input to the freeform fabrication process is essentially geometric data, raw material, material data and process parameters. Optimal process parameters depend upon current material and the part geometry. This paper describes an research approach in which all necessary input including process parameters are obtained or derived from the product model. The part geometry with its process parameters is transferred as a STEP model to the SFF system. In the SFF system this model is converted to the internal format, coupled to the process parameters. The approach is exemplified with the SLS machine from DTM as SFF system.en_US
dc.language.isoengen_US
dc.relation.ispartof1994 International Solid Freeform Fabrication Symposiumen_US
dc.subjectSFF Systemen_US
dc.subjectselective laser sinteringen_US
dc.subjectlaser power and laser thicknessen_US
dc.titleProduct Model Driven Direct Manufacturingen_US
dc.typeConference paperen_US
dc.description.departmentMechanical Engineeringen_US
dc.rights.restrictionOpenen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record