Show simple item record

dc.contributor.advisorBayrak, Oguzhan, 1969-en
dc.creatorDassow, Nicholas Alanen
dc.date.accessioned2015-10-16T19:32:34Zen
dc.date.available2015-10-16T19:32:34Zen
dc.date.issued2014-08en
dc.date.submittedAugust 2014en
dc.identifierdoi:10.15781/T2BG7Nen
dc.identifier.urihttp://hdl.handle.net/2152/31760en
dc.descriptiontexten
dc.description.abstractPrevious studies have shown that a uniform distribution of load may increase the shear strength of a slender member by as much as 40 percent (Leonhardt and Walther 1964). The increase of shear strength is potentially due to clamping stresses induced from the uniform load, although a mathematical equation to quantify the effect of clamping stress in slender uniformly loaded members has yet to be derived (Acevedo et al. 2009). Only a small percentage of all shear tests on slender specimens without shear reinforcement were completed with uniform load. Additionally, the majority of uniform load data consists of specimens with small specimen depths (d) and large longitudinal reinforcement ratios (ρ). Six shear tests on specimens without shear reinforcement were completed at the University of Texas at Austin. Three of the six specimens were subjected to concentrated load, and the remaining three companion specimens were loaded uniformly. These specimens are among the deepest slender members without shear reinforcement that have ever been tested under a uniform load distribution. Importantly, the ratio of maximum shear to maximum moment was maintained between concentrated and uniform load tests which ensures directly comparable tests results. The experimental results were shown to be influenced by load distribution. Uniformly loaded specimens had an average increase in first diagonal cracking shear capacity of 17 percent with a range of increase between 10 and 23 percent when compared with specimens subjected to concentrated loads.en
dc.format.mimetypeapplication/pdfen
dc.language.isoenen
dc.subjectUniform loaden
dc.subjectReinforced concreteen
dc.subjectShear strengthen
dc.subjectShear testsen
dc.subjectShear reinforcementen
dc.subjectSlender beamen
dc.titleEffect of uniform load on the shear strength of slender beams without shear reinforcementen
dc.typeThesisen
dc.date.updated2015-10-16T19:32:34Zen
dc.contributor.committeeMemberHrynyk, Trevoren
dc.description.departmentCivil, Architectural, and Environmental Engineeringen
thesis.degree.departmentCivil, Architectural, and Environmental Engineeringen
thesis.degree.disciplineCivil Engineeringen
thesis.degree.grantorThe University of Texas at Austinen
thesis.degree.levelMastersen
thesis.degree.nameMaster of Science in Engineeringen


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record