Show simple item record

dc.creatorRylander, H.G.en
dc.creatorWeldon, W.F.en
dc.date.accessioned2015-09-04T16:04:37Zen
dc.date.available2015-09-04T16:04:37Zen
dc.date.issued1980en
dc.identifierPR_11en
dc.identifier.citationH.G. Rylander and W.F. Weldon, “Analysis of defective hydrostatic radial bearings for 5 MJ homopolar generator,” ASME Publication No. 80-WA/DE-14, 1980.en
dc.identifier.urihttp://hdl.handle.net/2152/30574en
dc.description.abstractHydrostatic bearings were designed for a five megajoule homopolar generator since they offered the advantages of low shaft friction, high load capacity and high stiffness independent of shaft speed. The original bearings were satisfactory except for electrical pitting. A redesign using a high pressure laminated (G-9) fiberglass cloth reinforced melamine-formaldehyde resin composite resulted in a defective design. Design parameters are given with a complete analysis showing where the design was defective along with a satisfactory solution used in a subsequent redesign.en
dc.language.isoenen
dc.publisherAmerican Society of Mechanical Engineersen
dc.relation.ispartofCEM Publicationsen
dc.subjectRotating Machineen
dc.subjecthomopolar generatoren
dc.titleAnalysis of Defective Hydrostatic Radial Bearings for Five Megajoule Homopolar Generatoren
dc.typeconference paperen
dc.description.departmentCenter for Electromechanicsen
dc.rights.restrictionopenen


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record