Show simple item record

dc.contributor.advisorBourell, David Leeen
dc.creatorChen, Ssuweien
dc.date.accessioned2008-08-28T22:50:59Zen
dc.date.available2008-08-28T22:50:59Zen
dc.date.issued2006en
dc.identifierb61287118en
dc.identifier.urihttp://hdl.handle.net/2152/2474en
dc.descriptiontexten
dc.description.abstractA new manufacturing technique utilizing Selective Laser Sintering (SLS) has been developed for fabrication of proton exchange membrane fuel cell (PEMFC) bipolar plates. The layer-based nature of SLS offers several advantages for bipolar plate development and manufacturing. This additive process provides the ability to manufacture complex geometries that are otherwise difficult to obtain using conventional manufacturing techniques. SLS fabrication of bipolar plates will significantly benefit bipolar plate design research because prototypes can be produced and tested in a much shorter period of time and at a lower cost. In addition, fuel cell performance with plates having single serpentine, triple serpentine and interdigitated flow field designs were simulated using commercial Computational Fluid Dynamics (CFD) software package, FLUENT, which has a special PEMFC toolbox implemented for performance simulation. The PEMFC model in FLUENT is a multi-phase mixture model that is capable of predicting local current density distribution, temperature distribution and species vii concentration, etc. To verify the simulation results and demonstrate the value of the SLS technique, real plates with abovementioned flow field configurations were constructed based on the established SLS fabrication routes. Experiments were then conducted using a newly assembled PEMFC test unit with a bubble humidifier installed. Improved design and prompt experimental validation of fuel cell bipolar plates became possible through the combination of CFD simulation and the established indirect SLS process. Other novel bipolar plate designs were also proposed.
dc.format.mediumelectronicen
dc.language.isoengen
dc.rightsCopyright is held by the author. Presentation of this material on the Libraries' web site by University Libraries, The University of Texas at Austin was made possible under a limited license grant from the author who has retained all copyrights in the works.en
dc.subject.lcshFuel cellsen
dc.subject.lcshSinteringen
dc.titleFabrication of PEM fuel cell bipolar plate by indirect selective laser sinteringen
dc.description.departmentMaterials Science and Engineeringen
dc.identifier.oclc72449428en
dc.type.genreThesisen
thesis.degree.departmentMaterials Science and Engineeringen
thesis.degree.disciplineMaterials Science and Engineeringen
thesis.degree.grantorThe University of Texas at Austinen
thesis.degree.levelDoctoralen
thesis.degree.nameDoctor of Philosophyen


Files in this item

Icon

This item appears in the following Collection(s)

Show simple item record