Effects of convex curvature on adiabatic effectiveness for a film cooled turbine vane

Access full-text files

Date

2013-05

Authors

Winka, James R

Journal Title

Journal ISSN

Volume Title

Publisher

Abstract

A series of experiments were carried out to measure the effects of convex surface curvature on film cooling. In the first series of experiments cooling holes were positioned along the vane such that their non-dimensional curvature parameter, 2r/d, was matched. Single row of holes with the same diameter were placed at high and moderate curvature position along a turbine vane resulting in 2r/d = 28 and 40, accordingly. A third row of holes was installed on the vane at the same location as the moderate curvature row with a larger hole diameter, resulting in 2r/d = 28, matching the high curvature row. Adiabatic temperature measurements were then carried out for blowing ratios of M = 0.30 to 1.60 tested at a density ratio of DR = 1.20. The results indicated that there was some scaling of performance present with matching 2r/d, but there was not an exact matching of performance. The second series of experiments focused on the effects of a changing surface curvature downstream of injection. Two row of holes were positioned along the vane surface such that the local radius of curvature and hole diameters were equivalent, with one row positioned upstream of the maximum curvature point and the other downstream of the maximum curvature point. Adiabatic temperature measurements were carried out for blowing ratios of M = 0.30 to 1.60 and tested at a density ratio of DR = 1.20. The results show that the change in curvature downstream plays a significant role in the performance of film cooling and that the local surface curvature is insufficient in capturing its effects. Additional experiments were carried out to measure the effects of the approaching boundary layer influence on film cooling as well as the effect of injection angle at a weakly convex surface.

Description

text

LCSH Subject Headings

Citation