Show simple item record

dc.contributor.advisorKrifa, Mouraden
dc.contributor.advisorKoo, Joseph H.en
dc.creatorWu, Haoen
dc.date.accessioned2013-04-26T14:29:07Zen
dc.date.issued2012-05en
dc.date.submittedMay 2012en
dc.identifier.urihttp://hdl.handle.net/2152/20046en
dc.descriptiontexten
dc.description.abstractFlame retardant (FR) intumescent additives and montmorillonite (MMT) organoclay incorporated nylon-6 nanocomposite (FR-NC-PA6) fibers with a diameter of about 200 nm were fabricated by electrospinning. Before electrospinning, dispersion and exfoliation of the FR additive and MMT in nylon-6 were achieved by twin-screw extrusion. Tensile, TGA and UL-94 flammability tests were first performed using injection-molded bulk samples. The tensile modulus of FR-NC-PA6 was 45% higher than that of neat PA6, but tensile strength and elongation at break decreased by 23% and 98.7%, respectively. It is worth noting that although the TGA results show that FR-NC-PA6 has a slightly earlier decomposition temperature than neat PA6, it did not drip under fire and had the best rating (V-0) in UL 94 test, while neat PA6 is only rated as V-2. SEM and EDX of char residues after the UL 94 test clearly show the oxygen-rich protective char layer on the surface. These results indicate the advantage of using clay and FR additive in bulk-form PA6. Flammability of electrospun nanocomposite fibers was characterized by Micro-combustion calorimeter (MCC), a small-scale test to screen flammability of polymer materials. The MCC results show that the nano-fillers in both bulk and fiber form could effectively improve flame retardant properties of the material. Electrospun fibers had similar combustion properties as bulk materials. In addition to FR applications, superhydrophobic surface was another area that was explored using the electrospun nanocomposite fibers. Static water contact angle (WCA) test showed that samples with 5wt% clay even without plasma treatment greatly improved the WCA to 140°, probably due to the barrier effect of nanoclay platelets. Plasma treatment was used to modify the surface energy, further improving WCA to as high as 160°. However, fiber structure was partially etched away when overexposed to the plasma. This etching effect increased the surface roughness. Clay incorporated samples had higher level of surface roughness and better resistance to plasma etching compared to neat nylon 6.en
dc.format.mimetypeapplication/pdfen
dc.language.isoen_USen
dc.subjectElectrospinningen
dc.subjectNanocompositesen
dc.subjectFlame retardanten
dc.subjectSuperhydrophobicen
dc.subjectFunctional nanofibersen
dc.subjectProtective clothingen
dc.titleFunctional nanocomposite fibers through electrospinning : flame retardant and superhydrophobicen
dc.date.updated2013-04-26T14:29:08Zen
dc.description.departmentTextile and Apparel Technologyen
thesis.degree.departmentTextile and Apparel Technologyen
thesis.degree.disciplineTextiles and Apparel Technologyen
thesis.degree.grantorThe University of Texas at Austinen
thesis.degree.levelMastersen
thesis.degree.nameMaster of Science in Textile and Apparel Technologyen


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record