Browsing by Subject "Extraordinary transmission"

Now showing 1 - 3 of 3

Optical phenomena of plasmonic nanostructures and their applications in energy conversion
(2010-08) Wu, Shaomin; Chen, Shaochen; Banerjee, Sanjay K.; Shi, Li; Zhang, Xiaojing; Ferreira, Paulo J.
Metallic nanostructures such as nanoparticles, nanowires and nanoapertures exhibit extraordinary optical properties in absorption, scattering and transmission of electromagnetic radiation due to the excitation of surface plasmons. This allows them to provide applications in converting photon energy to other forms of energy such as heat, mechanical work and electricity in a more efficient or controlled manner. When incorporated into an amorphous silicon thin film solar cell, nanoparticles were found to substantially increase the light absorption in the photoactive layer within certain wavelength range. The mechanism of this optical absorption was studied using three-dimensional finite element method. It was found that intensified Fabry-Perot resonance in the active layer due to the addition of the nanostructures and enhanced light scattering by the plasmonic nanostructures were both responsible for this phenomenon. Interestingly, higher absorption only occurs at wavelength range outside the surface plasmons resonance of the nanostructures. A further study on the absorption of the nanoparticles themselves revealed that enhanced near field associated with the SP resonance of particles causes extraordinary energy dissipation in the particles, resulting in decreased light scattering. Strong power dissipation accompanied with the surface plasmons resonance becomes desirable when nanostructures are used as heat generator. Using the new technique of three-dimensional localization of the metallic nanoparticles on polymer microstructures, wavelength dependent controlling of a light-driven microactuator was achieved by selectively coating it with nanoparticles of different materials. Another important plasmonic nanostructure is the subwavelength hole arrays perforated on a metal film. The optical transmission through these nanometer scaled apertures whose dimensions are smaller than the wavelength of the incident light can be several orders of magnitude larger than expected. Based on this property, a novel tandem solar cell structure was proposed. A metal film perforated with periodic subwavelength hole arrays was inserted in a tandem solar cell as a light transmittable intermediate common electrode for the top and the bottom cell. The perforated electrode removes the current matching restriction in conventional tandem cells and allows active materials with different energy conversion and charge transport mechanisms to be combined in the same device. If used in a multi-junction solar cell, the new design can also save the power loss across the tunnel junction. The perforated intermediate electrode was modeled and its optical performance in the tandem solar cell was investigated.
Plasmonic properties of subwavelength structures and their applications in optical devices
(2010-12) Wang, Wei, 1983 July 24-; Shi, Li, Ph. D.; Chen, Shaochen; Zhang, Xiaojing; Ferreira, Paulo J.; Shvets, Gennady
A metallic hole array of a rectangular converging-diverging channel (RCDC) shape exhibits extraordinary transmission for wavelengths larger than the periodicity of the holes. We use a three-dimensional (3D) finite element method to analyze the transmission characteristics of two-dimensional metallic hole arrays (2D-MHA) with RCDC. For a straight channel MHA, when the aperture size is reduced, the transmission peaks have a blue-shift. The same result is observed for a smaller gap throat for the RCDC structure. For the rectangular holes with a high length-width ratio, a similar blue-shift in the transmission peaks as well as a narrower full width at half maximum (FWHM) are observed. The asymmetry from the rectangular shape gives this structure high selectivity for light with different polarizations. Furthermore, the RCDC shape gives extra degrees of geometrical variables to 2D-MHA for tuning the location of the transmission peak and the FWHM. Tunable extraordinary transmission via changing temperature of a porous metallic layer on top of a thin layer of dielectric strontium titanate (STO) is then studied. The metallic layer has a through-hole array and each hole has a circular converging-diverging channel (CDC) shape, which induces the excitation of surface plasmon polaritons (SPPs) and then results in a controllable extraordinary optical transmission in the terahertz (THz) frequency range. We use a three-dimensional (3D) finite element method to analyze the transmission characteristics of the structure. Location and magnitude of the transmission peaks can be adjusted by the hole size, converging angle, and thicknesses of metal and STO layers. Remarkably, the suggested structure presents a strong transmission dependency on temperature, which offers a new approach to actively and externally tune the transmission. Currently, the performances of thin film solar cells are limited by poor light absorption and carrier collection. In this research, large, broadband, and polarization-insensitive light absorption enhancement is realized via integrating with unique metallic nanogratings. Through simulation, three possible mechanisms are identified to be responsible for such an enormous enhancement. A test for totaling the absorption over the solar spectrum shows an up to ~30% broadband absorption enhancement when comparing to bare thin film cells. Overall performance of a thin film solar cell is determined by the efficiency of conversing photons to electrons that include light absorption, carrier generation and carrier collection processes. Photon management via hybrid designing has been emerging as a powerful means to further boost the conversion efficiency. Here a new nanograting solar cell design, which can be universal and a new solar cell platform technology, is proposed with goals to achieve large enhancement on broadband light absorption and carrier generation, most importantly, under the much reduced usage of active and non-earth-abundant materials. A test for the short circuit current density in CuIn[subscript x]Ga([subscript 1-x])Se₂ (CIGS) thin film solar cells shows an up to ~250% enhancement when comparing to the corresponding bare thin film cells. Besides that, by placing metal strips on top of the nanograting, which act as the top electrode, this design is able to reduce the use of non-earth-abundant materials such as indium that is normally used in both active and transparent conducting materials.
Radio-frequency metamaterials for cloaking, absorption and wave control
(2015-08) Soric, Jason Christopher; Alù, Andrea; Kerkhoff, Aaron; Ling, Hao; Pearce, John; Yilmaz, Ali
Metamaterial technology has provided us with new tools to explore fascinating applications and physical phenomena. Metamaterials have also inspired many scientists and engineers to think about concepts and ideas under a new light. In this work, we look at ways to use metamaterial technologies to solve modern-day challenges. In particular, we have realized covers enabled by metamaterials and metasurfaces that strongly suppress scattering at all angles, still allowing for field penetration inside the “cloaked” region. This important property opens great opportunities across a multitude of sensor applications. There are many current and forward-looking applications where a sensor with control over its presence to a given environment is of great interest. Advantages of our approach are simplicity of fabrication, resiliency to loss and manufacturing imperfections, extraordinarily low and conformal profile, and natural integration with electronics. In this work, we explore practical applications of our cloaking techniques including: low observability, interference reduction from closely spaced co-located antennas, and reduction or modulation of the scattering of receiving dipole antennas, while maintaining any desired level of received power. With such designs, high-performance sensing and measurement techniques, as well as commercial antenna applications, such as co-site antenna platforms and side-lobe level reduction can be envisioned.