Browsing by Subject "Emulsion stabilization"
Now showing 1 - 1 of 1
- Results Per Page
- Sort Options
Item Shear-induced emulsions stabilized with surface-modified silica nanoparticles(2011-05) Roberts, Matthew Ryan; Bryant, Steven L.; Huh, ChunThe ability of surface-treated silica nanoparticles to stabilize oil/water emulsions presents us with many interesting avenues of study. The goal of this research is to assess the ability of a dispersion of specially surface-treated nanoparticles to stabilize an oil/water emulsion of prescribed internal structure created by flow within a fracture. We hypothesize that for a set of conditions (nanoparticle concentration, salinity, aqueous to organic phase ratio) a critical shear rate exists. That is, for flow rates that exceed this critical shear rate, an emulsion can be created. Flow experiments were conducted within fractured Boise sandstone and cement cylinders. The Boise sandstone core (D = 1 in and L = 12 in) was cut down its length and propped open to a specific aperture with beads. The fracture was saturated with dodecane then displaced with nanoparticle dispersion, and vice versa while pressure drop across the fracture was recorded. Class H cement cylinders (D = 1 in and L = 3 in) were allowed to set, then failed in compression to create a rough-walled fracture along their length. These fractured cement cylinders were then sealed and encased in epoxy to isolate the fractures. CT scans of the encased fractures were used to determine the aperture width, which is utilized when calculating the shear rate inside of the fracture maintained during an experiment. A dispersion of surface-modified silica nanoparticles and decane were coinjected into both the Boise sandstone and cement fractures and the pressure drop was measured across the fractures at a variety of shear rates. The effluent of each experiment was collected in sample tubes. Observation of the effluent and pressure drop data both support our hypothesis of emulsion generation being possible once a critical shear rate has been reached. Alteration of the injected phase ratio and increased residence time of the two phases inside of a fracture both affect the amount of emulsification occurring within the fractures. Increasing the residence time of both phases within a fracture allows for more opportunities for emulsification to occur, resulting in a greater amount of emulsion to be generated. Injection of high or low volumetric ratios of nanoparticle dispersion to organic phase results in little amounts of emulsion generation; however, between the nanoparticle dispersion to organic phase ratios of 0.25:1 and 2:1 significant amounts of emulsion are generated.